Home / FPV Racing / Tiny Whoop / TINY WHOOP BUILD – STEP BY STEP VIDEO TUTORIAL

TINY WHOOP BUILD – STEP BY STEP VIDEO TUTORIAL

A comprehensive tiny whoop build video. Start to finish. Easy to understand Betaflight setup, bind procedure, tools, soldering tips, camera setup, channel mapping, and flight test.

Tools needed
– Mini screw driver set
– Solder sucker Remover (buy on Amazon)
– Fine tip soldering iron. (We use Hakko)
– Tweezers
– 6040 Solder and flux
– Helping hands ( By Hobby Creek)
– Wire snips
– WIFI and Laptop with Betaflight and drivers installed
– Transmitter of choice
– 1S battery
– Build Kit

Buy the F36 DIY Kit for Spectrum DSM2 Receivers here :
http://www.gearbest.com/micro-brushed-racer/pp_617111.html?lkid=10726053

Buy the F36 DIY Kit for FlySky Receivers here :
http://www.gearbest.com/micro-brushed-racer/pp_617110.html?lkid=10726065

Buy the F36 DIY Kit for FrSky Receivers here :
http://www.gearbest.com/micro-brushed-racer/pp_617109.html?lkid=10726067

Buy an adjustable Camera Mount here :
http://www.gearbest.com/fpv-system/pp_591230.html?lkid=10726119

Buy extra F36 Props here :
http://www.gearbest.com/rc-quadcopter-parts/pp_597295.html?lkid=10726105

Extra 1S “Micro connector” Batterys here :
http://www.gearbest.com/multi-rotor-parts/pp_605727.html?lkid=10726117

Video Timeline :
================
0:00 Introduction
1:00 Betaflight download & Tools needed
2:00 Bootloader solder for flashing Betaflight firmware
3:15 Flashing your flight controller
5:30 Removing the boot tab solder
6:40 Choosing a power connector
8:10 Soldering the battery cables
9:45 Binding receiver with FrSky Taranis Radio
11:00 Betaflight setup
14:15 Channel Mapping
15:00 Channel map stick orientation & mode switches
16:30 Modes and Arm Switch
18:50 Soldering your AIO Camera
21:26 Flight controller install
22:15 Motor installation
24:00 Camera mount options
26:15 Connecting motors
28:15 Motor direction testing
29:10 Setting Motor PWM rates in the CLI
30:40 “RRR” Right turn rear. Prop installation.
31:30 First flight test
31:55 Build complete

Visit http://www.dronecamps.com
and for $5 you can join the Quad Club
for members only benefits.

– Tech support
– Quadcopter deals
– Email news
– Drone Camps support
– Member articles

Drone Camps on Youtube
Subscribe for weekly new
drones, honest reviews, prototypes,
tutorials, and tech gadgets. – Mon – Fri

Business Inquires:
To get your product reviewed please email:
drone camps @ gmail. com

Drone Camps RC
www.dronecamps.com

LIKE us on Facebook
https://www.facebook.com/dronecamps

FOLLOW on Instagram:
https://www.instagram.com/dronecamps/

Pilots : Sorry we do not provide free phone or email tech support for any drones shown on this Youtube Channel or on the web. Please leave a comment or question below for our community or Justin Davis to answer.

Leave a Reply

Your email address will not be published. Required fields are marked *